Zoom - Verschluesselung (Ende-zu-Ende) nutzen/en: Unterschied zwischen den Versionen

Aktuelle Version vom 9. September 2024, 21:44 Uhr

Die deutsche Version finden Sie auf der Seite Zoom - Verschlüsselung (Ende-zu-Ende) nutzen

By default, transport encryption (similar to https) is activated for all Zoom conferences. This guarantees that the conference content is protected from strangers (hackers) during transmission between participants and Zoom servers. However, the operators of the Zoom servers can view the data. The University of Paderborn's campus license is operated by a German company (Deutsche Telekom), to which European data protection law directly applies. The US manufacturer has access to parts of Zoom, which are contractually regulated and limited, but cannot be excluded.

By activating the so-called end-to-end encryption (E2EE - end to end encryption)' in Zoom, the confidentiality of communication can be completely guaranteed. This means that neither the operator of the Zoom campus license (Deutsche Telekom) nor the manufacturer of the software (Zoom in the USA) can access the content of the communication. The disadvantage is that not all zoom functions are fully available when using E2EE and the Zoom client must currently always be used.

In addition to the content of a conference, further data called metadata (IP addresses of participants, device/hardware information, e.g. browser, name and description of the meeting, date, start, duration, number of participants) is generated. These are passed on to Zoom in the USA in every meeting, for example to better localize problems and errors and to generate usage statistics.

For conferences with confidential and personal content, such as job applications or personnel interviews, appointment procedures, senate or presidium meetings, etc., Zoom at the University of Paderborn may only be used after the organizer has considered data protection law and only with activated end-to-end encryption.

Zoom can usually be used in the standard setting for courses, meetings or public events.

Requirements for the E2EE[Bearbeiten | Quelltext bearbeiten]

Participants must have the Zoom client version 5.4.0 or newer installed on their devices.

Limitations[Bearbeiten | Quelltext bearbeiten]

If end-to-end encryption is activated, you currently have to do without the following Zoom functions (as of October 28, 2023):

Join before moderator
Cloud recording
Live streaming
Live transcription
Conference rooms
Polls
Zoom apps
Telephone dial-in

The following functions are only available if the Zoom client is used in version 5.5.0 or newer:

Meeting reactions e.g. “Raise of hand”
Private one-on-one chats

Participation in end-to-end encrypted Zoom meetings via browser is not possible. If you want participants to join via browser, you must disable end-to-end encryption.

Encryption[Bearbeiten | Quelltext bearbeiten]

Enable end-to-end encryption[Bearbeiten | Quelltext bearbeiten]

To use end-to-end encryption in a meeting, follow these steps.

In the Zoom app, click Calendar to schedule a new meeting.

Enable “end-to-end encryption”.

Enable end-to-end encryption permanently[Bearbeiten | Quelltext bearbeiten]

You don't want to switch on end-to-end encryption again for every conference? You can set this as the default. Open your Zoom account in the browser.

Click on “Settings”.

Set “End-to-end encryption” as default.
The menu item is currently marked as end-to-end encryption' under Predefined license type in the German interface

Note that end-to-end encryption comes with the Limitations listed above!

Check encryption[Bearbeiten | Quelltext bearbeiten]

Within the meeting you can see which encryption is active by looking at the symbol at the top left.

	Check mark on green sign. Only transport encryption active. For non-confidential conferences.
	Lock on green sign. End-to-end encryption active. For confidential conferences.

Compare security codes to check if the meeting is secure. To do this, click on the green icon.

Click “Verify”.

The security codes should be the same for all participants.

@@ Zeile 4: / Zeile 4: @@
 |translated title=Zoom - Using end-to-end encryption
 }}
+By default, transport encryption (similar to https) is activated for all Zoom conferences. This guarantees that the conference content is protected from strangers (hackers) during transmission between participants and Zoom servers. However, the operators of the Zoom servers can view the data. The University of Paderborn's campus license is operated by a German company (Deutsche Telekom), to which European data protection law directly applies. The US manufacturer has access to parts of Zoom, which are contractually regulated and limited, but cannot be excluded.
-Zoom meetings are TLS encrypted (like https). This secures the conference against third parties like hackers. The campus license of the university Paderborn is provided by a company located in Germany (Connect4Video GmbH – C4V). TLS encryption can’t secure the conversations against access of zoom or C4V. Both parties assure they don’t access the conversations but this can’t be guaranteed.
+By activating the so-called ''end-to-end encryption (E2EE - end to end encryption)''' in Zoom, the confidentiality of communication can be completely guaranteed. This means that neither the operator of the Zoom campus license (Deutsche Telekom) nor the manufacturer of the software (Zoom in the USA) can access the content of the communication. The disadvantage is that not all zoom functions are fully available when using E2EE and the Zoom client must currently always be used.
+In addition to the content of a conference, further data called metadata (IP addresses of participants, device/hardware information, e.g. browser, name and description of the meeting, date, start, duration, number of participants) is generated. These are passed on to Zoom in the USA in every meeting, for example to better localize problems and errors and to generate usage statistics.
-Confidential conversations can be held by using the end-to-end-encryption (E2EE). With this option, neither zoom nor C4V can access the content of the video conference. While using the end-to-end-encryption, not all zoom features are available. For end-to-end encrypted meetings, the Zoom client must be used. Joining the conference via browser is not possible.
+For conferences with confidential and personal content, such as job applications or personnel interviews, appointment procedures, senate or presidium meetings, etc., Zoom at the University of Paderborn may only be used after the organizer has considered data protection law and only with activated end-to-end encryption.'''
-Additional to the content of the conversations, zoom is gathering metadata. Examples are the IP address of the participants, device and hardware information, browser configuration, name and description of the meeting, date, time, duration of the meeting and number of participants. These information are available for zoom and C4V, even when the end-to-end-encryption is used. This information can be transferred to zoom USA for problem diagnosis and enhanced user experience. In case of privacy, gathering metadata must be seen critical. We recommend an evaluation if another service like BBB, Jitsi Meet, or DFNconf can be used which provides more privacy.
+Zoom can usually be used in the standard setting for courses, meetings or public events.
-We recommend the usage of zoom only for conferences with significantly more than 20 participants. For smaller groups, services with more privacy should be used, like mentioned above. For conferences in which personal data is discussed, Jitsi Meet, BBB and DFNconf should be favored.
+== Requirements for the E2EE ==
+Participants must have the Zoom client version 5.4.0 or newer installed on their devices.
-For conferences with confidential information like job interviews, appraisal interviews, appeal hearings, senate and chair conferences Zoom can only be used after a consideration of data protection laws by the host and only with activated end-to-end encryption.
+== Limitations ==
+If end-to-end encryption is activated, you currently have to do without the following Zoom functions (as of October 28, 2023):
-For courses, lectures, seminars, conventions and public events, zoom normally can be used in default settings.
+* Join before moderator
-== Requirements for E2EE ==
-The participants need to have the zoom client in version 5.4.0 or newer installed. Joining via browser is not possible.
-== Restrictions ==
-With activated end-to-end-encryption, the following features are not available: (February 2021)
-* Polling
-* Breakout Rooms
 * Cloud recording
-* Join before host
+* Live streaming
 * Live transcription
-* Live Streaming
+* Conference rooms
+* Polls
+* Zoom apps
+* Telephone dial-in
-* Join by phone
+<br>
-The following features are only available by using the Zoom Client in Version 5.5.0 or higher:
+The following functions are only available if the Zoom client is used in version 5.5.0 or newer:
-* Meeting reactions (like “raise hand”
+* Meeting reactions e.g. “Raise of hand”
-* 1:1 private chats
+* Private one-on-one chats
-Joining end-to-end-encrypted meetings via browser is not possible.
+<br>
+Participation in end-to-end encrypted Zoom meetings via browser is not possible. If you want participants to join via browser, you must disable end-to-end encryption.
 == Encryption ==
-=== Activate end-to-end-encryption ===
+=== Enable end-to-end encryption ===
-Use the following settings to activate end-to-end-encryption.
+To use end-to-end encryption in a meeting, follow these steps.
-  [[Datei:Zoom- Verschluesselung end-to-end 01.png |left |mini|ohne|x200px]]
+  [[Datei:Zoom- Verschluesselung end-to-end 01.png |links|mini|ohne|x200px]]
 <br><br>
-*Use the Calendar to create a new Zoom meeting.
+* In the Zoom app, click Calendar to schedule a new meeting.
 <br clear=all>
-  [[Datei:Zoom- Verschluesselung end-to-end 02.png |left|mini|ohne|x300px]]
+  [[Datei:Zoom- Verschluesselung end-to-end 02.png |links|mini|ohne|x300px]]
 <br><br>
-* Activate end-to-end encryption.
+* Enable “end-to-end encryption”.
 <br clear=all>
-=== End-to-end encryption as default===
+=== Enable end-to-end encryption permanently ===
-You can set end-to-end-encryption as the default setting for Zoom meetings. Open the Zoom account in your browser.
+You don't want to switch on end-to-end encryption again for every conference? You can set this as the default. Open your Zoom account in the browser.
-   [[Datei:Zoom- Verschluesselung end-to-end 03.png |left|mini|ohne|x300px]]
+   [[Datei:Zoom- Verschluesselung end-to-end 03.png |links|mini|ohne|x300px]]
 <br><br>
-* Click on  „Settings“.
+* Click on “Settings”.
 <br clear=all>
+* Set “End-to-end encryption” as default.
+*: The menu item is currently marked as ''end-to-end encryption''' under ''Predefined license type'' in the German interface
+<br clear=all>
-  [[Datei:Zoom- Verschluesselung end-to-end 04.png |left|mini|ohne|x300px]]
+  [[Datei:Zoom- Verschluesselung end-to-end 04.png |links|mini|ohne|x300px|English view]]
-<br> <br>
+ [[Datei:Zoom- Verschluesselung end-to-end 04b.png |links|mini|ohne|x300px|German view]]
-* Click on „End-to-end encryption“ as default.
 <br clear=all>
-=== Verschlüsselung prüfen ===
+Note that end-to-end encryption comes with the [[#Limitations|Limitations]] listed above!
-In the meeting, the symbol in the top left hand corner shows you, which encryption is active.
+=== Check encryption ===
+Within the meeting you can see which encryption is active by looking at the symbol at the top left.
 {|
 |-
-| [[Datei:Zoom- Verschluesselung end-to-end 05.png |left|ohne|x36px]]|| Check on green shield. Only TLS encrypted. For non confidential meetings.
+| [[Datei:Zoom- Verschluesselung end-to-end 05.png |links|ohne|x36px]]|| ''Check mark on green sign. Only transport encryption active. For non-confidential conferences.''
 |-
-| [[Datei:Zoom- Verschluesselung end-to-end 06.png |left|ohne|x36px]]|| Lock on green shield. End-to-end-encryption active. For confidential meetings.
+| [[Datei:Zoom- Verschluesselung end-to-end 06.png |links|ohne|x36px]]|| ''Lock on green sign. End-to-end encryption active. For confidential conferences.''
 |}
-Compare the security codes, to check if the meeting is secure. Click on the green Symbol.
-[[Datei:Zoom- Verschluesselung end-to-end 07.png |center|mini|ohne|x300px]]
+Compare security codes to check if the meeting is secure. To do this, click on the green icon.
-<br>
-* Click on '''"Verify"'''.
+* Click “Verify”.
-<br clear=all>
+  [[Datei:Zoom- Verschluesselung end-to-end 07.png |mitte|mini|ohne|x300px]]
+The security codes should be the same for all participants.
-  [[Datei:Zoom- Verschluesselung end-to-end 08.png |center|mini|ohne|x300px|The security codes need to match with each other.]]
+  [[Datei:Zoom- Verschluesselung end-to-end 08.png |mitte|mini|ohne|x300px]]
-<br clear=all>
 == See also ==
-* [[Zoom|Alle Artikel zu Zoom]]
+* [[Zoom]] - Overview of all articles on Zoom
-* [[Zoom_Meetings#Nutzungsbedingungen_und_Datenschutzhinweise| Zoom-Datenschutzerklärung & Zoom-Nutzungserklärung]]
+* [[Zoom - Allgemeine Informationen#Nutzungsbedingungen und Datenschutzhinweise| Zoom Privacy Policy & Zoom Usage Policy]]
-* [[Videokonferenz| Alle Artikel zum Thema Videokonferenzen - Auch Alternativen zu Zoom]]
+* [[Videokonferenz| All articles on the topic of video conferences - including alternatives to Zoom]]

	Mo-Do	Fr
Vor-Ort-Support	08:30 - 16:00	08:30 - 14:00
Telefonsupport	08:30 - 16:00	08:30 - 14:00

Mo-Do	Fr
08:00 - 16:00	08:00 - 14:30